Products

ATEX Approved Pressure and Vacuum Feedthroughs

Series WF - Feedthroughs for multiple wires and probes

When multiple wires must pass through a pressure boundary, series WF feedthroughs can provide an efficient seal without recourse to epoxies or other non-adjustable fixture methods.

Different types of these assemblies may be specified according to the type of element required to pass through the feedthrough. Series WF assemblies cater for up to 12 bare or insulated wires – sizes from 24AWG (0.2mm2) to 8AWG (approx. 8.8mm2).

Insulators within WF feedthrough assemblies protect bare wires and provide additional isolation for Kapton® insulated power wires. These are rated 55A @ 600Vdc/850Vac max. Feedthroughs with power wires can be supplied as complete assemblies, ready for installation, with wires cut to specified lengths.

WF feedthroughs can also accommodate up to 12, small diameter sensor elements that must be electrically isolated from each other.
  • ATEX Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
  • Seal on Kapton® insulated copper or thermocouple wires – type WFS
  • Seal on bare wires carrying instrumentation voltages – type WFR
  • Seal on small diameter sheathed sensors, max. 3.2mm dia. – type WFP
  • Pressure range: Vacuum to 700 bar*
  • Temperature range: -60°C to +200°C*
  • Stainless steel body (316L), cap, internal follower and seat
  • Choice of 3 sealant materials
  • Individual wires can be replaced without complete disassembly
  • Reusable fitting – sealant and internal components replaceable
  • * Dependent on sealant and fitting selected

Enquiry Form

1. Feedthrough Type


2. Thread Size Required


  see table

3. Element Size


 see table

4. No. of Elements


 see table

5. Sealant Type


 see table

6. Quantity Required


Contact Details


Company Name


Your Name


Email


Telephone


Additional Information


If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  
BACK TO TOP
ATEX Thermocouples with Pot Seal

ATEX Thermocouples with Die Cast Alloy Head

ATEX Thermocouples with St. / Steel Head

ATEX Thermocouples with Dual Entry Head

ATEX Thermocouples with Spring loaded terminal block

ATEX Thermocouples with Terminal Entry Gland

ATEX Spring Loaded Thermocouples

ATEX Thermocouple Feedthroughs
ATEX RTD Pt100 Sensors with Pot Seal

ATEX RTD Pt100 Sensors with Die Cast Alloy Head

ATEX RTD Pt100 Sensors with St. / Steel Head

ATEX RTD Pt100 Sensors with Dual Entry Head

ATEX RTD Pt100 Sensors with Spring loaded terminal block

ATEX RTD Pt100 Sensors with Terminal Entry Gland

ATEX Spring Loaded RTD Pt100 Sensors
ATEX 4 to 20mA Indicators

ATEX Temperature Transmitters

ATEX Compression Fittings

ATEX Terminal Heads

ATEX Pressure and Vacuum Feedthroughs



© 2014- TC Ltd., PO Box 130, UXBRIDGE UB8 2YS United Kingdom.
Tel.: 01895 252222, Fax: 01895 273540, Email: info@tc-atex.com