ATEX Approved Pressure and Vacuum Feedthroughs
Series MF - Feedthroughs for multiple elements
Send Enquiry
Data Sheet
Request InfoAlso available with IECEx Approval Also available with EAC Ex Approval
A single access port into an enclosure or process vessel is all that is needed to allow multiple probes, sensors, etc., to pass through an environmental or pressure boundary using a single feedthrough assembly.
Series MF feedthroughs can seal multiple elements within a single assembly including typically up to 40 x 1.0mm dia., up to 27 x 3.0mm or up to 7 x 6.0mm elements. Please refer to the table for further details of feedthrough capacity and sizes of elements.
There are five body sizes having 1/8”, 1/4”, 1/2”, 3/4” and 1”process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.
Spectite® feedthroughs are designed for ease of assembly and installation. Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions.
Series MF feedthroughs can seal multiple elements within a single assembly including typically up to 40 x 1.0mm dia., up to 27 x 3.0mm or up to 7 x 6.0mm elements. Please refer to the table for further details of feedthrough capacity and sizes of elements.
There are five body sizes having 1/8”, 1/4”, 1/2”, 3/4” and 1”process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.
Spectite® feedthroughs are designed for ease of assembly and installation. Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions.
- ATEX Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
- Saves time and costs as multiple sensors pass through one feedthrough
- Immersion length of each element can be easily adjusted
- Five sizes of sealed feedthrough for probes, sensors, etc.
- Designed for carrying multiple elements
- Suitable for a mixture of sizes and types of elements
- Pressure range: Vacuum to 700 bar*
- Temperature range: -60°C to +450°C*
- Stainless steel body (316L), internal metal components and cap
- Reusable fitting – sealant and internal components replaceable * Dependent on sealant and fitting selected
